(Note that for routers that feature a native AP mode, you will actually make use of the WAN port.
When the configuration is done, put the old router in place.
You need to set up both routers so that IP addresses will be handled properly and neither router will issue a dhcp conflict.
That said, when you replace your old Wi-Fi router with a better faster one, you can spend time trying to convince someone to take a five-year old router off your hands, or you can turn it into an external Access Point (AP).
The router's current IP address will not be available to use.Windows 8 just type cmd when you're at the Metro Start menu, then press Enter).Either way, all devices connected to either router will be part of the same network.Step 1: Configure ssid, the first step is the easiest step.This way the new router can be set to only allow 802.11n connections, so the old clients won't connect and degrade the performance.Just make sure you haven't and will not manually use this IP for any other device.Note: Make sure that your router is loaded with the latest firmware version.Now Playing: Watch this: How to turn an old Wi-Fi router into an access point 3:49, hack texas holdem poker cheat 2012 and 2013 a network needs only one router to function.All other LAN ports on your TP-Link N router will now grant devices Internet access.Alternatively, any Wi-Fi device can now access the Internet through your TP-Link N router by using the ssid and Password set up in the above steps.First off, wireless routers contain.
APs broadcast Wi-Fi signals that wireless clients like smartphones, tablets, etc.
Using the WAN will make the router automatically function like a router because that's the intended role of the device: a router connects to the Internet and shares that connection with the rest of the network it hosts.
Installing the latest firmware on a netgear router.
Of course, 802.11n clients that connect to the 802.11g router won't run at 11n rates of speed and performance, but the old router is earning its keep by providing "free coverage.".Step 4, go to, wireless Wireless Security and configure the wireless security.Performing the Conversion, in addition to changing general settings, turning a wireless router into an access point consists of disabling its.Then make sure to save the changes.WPA/WPA2-Personal is recommended as the most secure option. .(Depending on the interface, some routers allow you to do step 3 and 4 as one step without restarting).Enter the following default login credentials: Note : username and password are both case sensitive.Channel: Change the channel to one of the three non-overlapping channels, 1, 6, or 11, while making sure any coexisting or overlapping routers or APs aren't set to the same channel.